| |
Etem
1000
E-1000 is a system of aluminum windows without thermal break. It satisfies modern aesthetic requirements for windows, combined with the necessary structural features of the profiles.
-
Opening - regular opening, two planes opening, opening in and out, opening lower and upper horizontal axis, parallel sliding.
-
Casement - a variety of casements - straight and curved lines; inside ending profile casement, combined casement for windows and shutters.
-
Wings - different sizes: for windows and doors, opened inwards and outwards.
-
Glazing - straight and curved lines, allowing use of glass from 4 mm. to 22 mm.
-
Specially designed EPDM gaskets with increased contact area / 6 mm / in order to achieve maximum sealing of the structure. Three seals: outer, central and internal.
SIC
Engineering offers you 3% discount for 100% advance payment.
|
Outline |
Dimensions |
Price |
|
|
|
 |
L = 800 mm
H = 1990 mm |
|
AL door with particle board -
210 lv. |
|
AL door with thermal filling - 265 lv. |
|
AL door with mirror/mirror -
350 lv. |
|
|
|
|
 |
L = 3200 mm
H = 1600 mm |
|
AL sliding with single glass - 610 lv. |
|
AL sliding with glaing
white/white - 690 lv. |
|
Etem
40
E-40
is a system of aluminum windows
with thermal break. Heat transfer
coefficient Uf = 2,8 W / m². K,
group 2.1 / 2 <Uf <= 2,8 W / m². K /
according to DIN 4108. Satisfy
modern aesthetic requirements for
windows, combined with the necessary
structural features of the profiles.
Stress incurring points are
strengthened. The system allows
fixed and opening positions.
-
Opening - regular opening, two planes opening, opening in and out, opening lower and upper horizontal axis, parallel sliding.
-
Casement – casements with 3 different size cells - straight and curved lines; inside ending profile casement, combined casement for windows and shutters.
-
Wings – 3 sizes with straight line and 3 with curved lines: for windows and doors, opened inwards and outwards.
-
Glazing - straight and curved lines, allowing use of glass from 6 mm. to 34 mm.
-
Specially designed EPDM gaskets with increased contact area / 6 mm / in order to achieve maximum sealing of the structure. Three seals: outer, central and internal.
SIC
Engineering offers you 3% discount for 100% advance payment.
|
|
