Promotion of external thermal insulation
32 lv. / sq.m. with free plastering around windows
Promotion applies to external insulation with EPS 5 cm and white plaster

SIC Engineering Ltd. provides renovation and insulation of buildings with climbers and scaffold. The materials used for insulation are guaranteed maximum energy protection and efficiency!

Mineral (stone) wool is natural, inorganic and mineral product on the basis of basalt minerals. Due to its fibrous structure, mineral wool, has extremely good insulation properties, high degree of noise absorption and less reflection noise.

Mineral wool retains its shape and volume more than 50 years, and their porous structure provides high steam transfer rate. Mineral wool absorbs most of the sound waves that hit the surface. The wool isolate unwanted noise and spreading vibrations.

Expanded polystyrene (EPS) is a synthetic polymer with a closed structure of lattice of air filled spherical particles. It is a microporous synthetic organic material, 95% of its volume is air. Thanks to its excellent thermal insulation properties with good strength, minimum deformation, limited vapor permeability and fire resistance (Class B1), EPS is proven over time insulating material.

Used for insulation without excessive load pressure: under roof insulation, isolation inside walls, internal insulation behind protective cladding, façade insulation.

The boards of extruded polystyrene thermal insulation material (XPS), are made of polystyrene and suitable agents through a process of continuous extrusion, which forms a continuous sheet with desired thickness (20-100 mm). XPS boards are characterized by their high and stable heat insulating property, minimal water absorption, high compressive strength and dimensional stability. Difficult flammability, excellent compatibility with construction materials such as cement, gypsum, lime and sand, and peeled and corrugated panels offer excellent grip / adhesion to concrete and mortar coatings / plasters.

Used for insulation under foundation slabs, insulation for large loads of pressure, eg. under coating, industrial floor or on a traditional flat roof, insulating walls and slabs, external insulation of walls.

NEOPOR insulating material is a material from a new generation. Graphite particles embedded in the structure of the material play a very important role in the process of contact between NEOPOR and thermal radiation. In particular they prevent its passage reflecting radiation, reducing significantly the heat absorbing of the material. Overall, the use of this material increases about 60% the energy efficiency of the building.

Graphite plates are used for thermal insulation of walls, floors, roofs, interior and exterior walls, basements and underground facilities, cold rooms, etc.. Graphite, with its unique properties, reflects the passage of infrared and UV rays, making it a wonderful addition to isolation and secure defender against penetration of radiation. Because of these factors isolation has a guaranteed life of over 35 years.